QUICK RELEASE ACCESSORIES

QUICK RELEASE ACCESSORIES 

There are 90 products.
QUICK RELEASE ACCESSORIES
Bungee sail tie, 4 mm, 40 cm

Elastne purje kinnitusots, otstes plastikust pallid. Pikkus 40 cm; Läbimõõt: 4 mm.

3,00 €
In Stock
R.A.M
RAM-109HU UNPKD RAM SING SWING ARM MOUNT SYS. HORZ

The RAM-109HU consists of a 6" long bent swing arm mounted on a horizontal surface base. At the device mounting end is a rectangular 6.25" x 2" plate. There are two pivoting points on the mount: one at the base of the swing arm and one at the center of the rectangular plate. Each pivoting point allows a complete 360-degree rotation.

109,90 €
In Stock
R.A.M
RAM-109VU UNPKD RAM SING SWING ARM MOUNT SYS. VERT

The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point...

129,90 €
In Stock
R.A.M
RAM-111U UNPKD RAM UNIVERSAL ELECTRONIC MOUNT

The RAM-111U consists of a medium double socket arm, 2.5" diameter round base, and 6.25" x 2" rectangle base. The round base includes a 1.5" C size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 1.5" C size rubber ball and contains a variety of pre-drilled holes that are compatible...

88,90 €
In Stock
R.A.M
RAM-111U-B RAM MOUNT W/1.5" BALLS B LENGTH ARMS

The RAM-111U-B consists of a short double socket arm, 2.5" diameter round base, and 6.25" x 2" rectangle base. The round base includes a 1.5" C size rubber ball and contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base also includes a 1.5" C size rubber ball and contains a variety of pre-drilled holes that are...

82,90 €
In Stock
R.A.M
RAM-117U UNPKD RAM-ROD FISHING ROD HOLDER SYSTEM

The RAM ROD® 2000 fishing rod holder is RAM’s original rod holder. This unique design offers quick removal of the rod when a fish is on, and features a securing flip-over bail for rod security while trolling or for use as rod storage. Utilizing two RAM patented 1.5” balls, this rod holder offers the ultimate in adjustability and versatility. Ideally...

84,90 €
In Stock
R.A.M
RAM-201U UNPKD RAM DBL BALL SOCKET ARM ASSEMBLY

The RAM-201U consists of a medium length double socket arm that accommodates 1.5" C size ball bases, device holders, and adapters. A single spring inside the arm keeps the socket open, and allows you to insert the ball into the socket connection. This arm has an overall length of 5.69". The easy to adjust knob allows for near-infinite adjustability.

38,90 €
In Stock
R.A.M
RAM-201U-D UNPKG RAM DBL SOCKET ARM C BALL D LENGTH

The RAM-201U-D consists of a long double socket arm that accommodates 1.5" C size ball bases, device holders, and adapters. With an overall length of 9.125", this is the longest C size RAM® double socket arm size and adds more reach to your favorite mounting solution. The easy to adjust knob allows for near-infinite adjustability.

73,90 €
In Stock
R.A.M
RAM-202U UNPKD RAM 2-1/2" DIA. BASE

The RAM-202U consists of a 1.5" C size rubber ball connected to a 2.5" diameter round plate. This mounting component includes pre-drilled holes using the universal AMPS hole pattern.

24,90 €
In Stock
R.A.M
RAM-202U-153 RAM BASE 1.5" X 3" W/ 1 1/2" BALL

The RAM-202U-153 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1" x 2.5" center to center.

24,90 €
In Stock
R.A.M
RAM-202U-LO11 UNPKD RAM BASE LOWRANCE MARK AND ELITE

The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite-5, Elite-5 Ti, Elite-7 Ti/Ti², HOOK-3, HOOK-4, HOOK-5 and MARK-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds.

26,90 €
In Stock
R.A.M
RAM-231U UNPK RAM W/ U-BOLT FOR 3/4" TO 1" DIA.

The RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The "Rust-Proof" stainless steel u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum...

32,90 €
In Stock
R.A.M
RAM-235U UNPK RAM W/2 U-BOLTS FOR 3/4 TO 1 1/4

The RAM-235U consists of a double U-bolt base with 1.5" diameter ball and two stainless steel u-bolts. The double U-bolt base will accommodate rails from 1" to 1.25" in diameter.

41,90 €
In Stock
R.A.M
RAM-238U UNPKD RAM 2 7/16" X 1 5/16" BASE W/ BALL

The RAM-238U ball base consists of a 1.5" C size rubber ball connected to a 2.43" x 1.31" diamond plate. The diamond plate features two holes that measure 1.912" from center to center, matching the industry-standard AMPS hole pattern. This diamond ball base is compatible with a wide variety of RAM® device holders and cradles.

23,90 €
In Stock
R.A.M
RAM-B-138-GOP1U UNPKD RAM MOUNT ROUND BASE GOPRO

The RAM-B-138-GOP1U consists of a 2.5" diameter round base with the universal AMPS hole pattern, STANDARD size double socket arm and 1" diameter ball with custom GoPro® Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost...

48,90 €
In Stock
R.A.M
RAM-B-166-UN7U UNPKD RAM SUCTION MOUNT RAM X-GRIP

Ideal for vehicle windshields, the RAM-B-166-UN7U consists of a 3.3" diameter RAM® Twist-Lock™ suction cup base, medium length double socket arm, and the popular spring-loaded RAM® X-Grip® phone holder. The RAM® X-Grip® features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of...

94,90 €
In Stock
R.A.M
RAM-B-201U UNPKD RAM DOUBLE SOCKET ARM FOR 1" BALL

The RAM-B-201U consists of a medium double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 3.73", this is the standard RAM® double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.

23,90 €
In Stock
R.A.M
RAM-B-202-GA76U UNPKD RAM MOUNT WITH BALL FOR GARMIN HANDHELD DEVICES

With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM® Compatible™. This spine mount adapter easily clips into the integrated spine connection on a wide variety of Garmin devices. For use in nearly any application, the included B size diamond base adapter and hardware allows you to connect your...

23,90 €
In Stock
R.A.M
RAM-B-202U UNPKD. RAM 2 7/16" DIA.BASE WITH 1" BALL

The RAM-B-202U consists of a 1" B size rubber ball connected to a 2.5" diameter round plate. This mounting component includes pre-drilled holes using the universal AMPS hole pattern.

19,90 €
In Stock
R.A.M
RAM-B-202U-153 RAM BASE 1.5" X 3" W/ 1" BALL

The RAM-B-202U-153 contains a 1" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1" x 2.5" center to center.

25,90 €
In Stock
R.A.M
RAM-B-235U RAM DBL U-BOLT BASE W/ 1" BALL

The RAM-B-235U consists of a double U-bolt base with 1" diameter ball and two stainless steel U-bolts. The double U-bolt base will accommodate rails from 1" to 1.25" in diameter.

37,90 €
In Stock
R.A.M
RAM-B-238U UNPKD RAM 2 7/16" X 1 5/16" BASE W/ BALL

The RAP-B-238U ball base consists of a 1" B size rubber ball connected to a 2.43" x 1.31" diamond plate. The diamond plate features two holes that measure 1.912" from center to center, matching the industry-standard AMPS hole pattern. This diamond ball base is compatible with a wide variety of RAM® device holders and cradles.

16,90 €
In Stock
R.A.M
RAM-D-201U UNPKD RAM DOUBLE SOCKET ARM D BALLS

The RAM-D-201U, standard size double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

125,90 €
In Stock
R.A.M
RAM-D-202U UNPKD RAM 3.68 DIA. BASE WITH BALL

The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round base. The base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees.

49,90 €
In Stock
R.A.M
RAM-D-235U UNPK RAM W/ 2 U-BOLTS FOR 3/4 TO 1 1/4

The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 1" to 1.25" in diameter.

64,90 €
In Stock
R.A.M
RAM-HOL-UN7B RAM X-GRIP UNIVERSAL HOLDER W/ 1" BALL

The popular spring-loaded RAM® X-Grip® phone holder features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, the RAM® X-Grip® phone holder is compatible with a wide variety of RAM® double socket arms and mounting bases. This version of the RAM®...

59,90 €
In Stock
R.A.M
RAM® Ball Base with 1.5" x 4.5" 4-Hole Pattern

The RAM-D-202U-25 contains a 2.25" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 4.5" center to center.

48,97 €
In Stock
R.A.M
RAP-354U-TRA1 RAM 1.5" TRACK BALL WITH T-BOLT ATTACH

The RAM Track Ball is made up of a C size 1.5" rubber ball molded to a high strength composite base, a rubber friction washer and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the Track Ball into your track and twist the ball clockwise to tighten in place. Twist counterclockwise to loosen or adjust the ball.

27,90 €
In Stock
R.A.M
RAP-383U UNPKD RAM 1 1/2" BALL QUICK TRACK BASE

For the serious kayak angler, the RAM Quick Release Track Base is a universal mounting solution for a wide variety of kayak products including RAM fishing rod holders, camera and transducer deployment arms. Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten the base to your existing track system or many other's...

37,90 €
In Stock
R.A.M
RAP-400U UNPKD RAM TOUGH-CLAW WITH 1.5" DIA BALL

The RAM® Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The small version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from .625" to 1.14" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide...

64,90 €
In Stock
R.A.M
RAP-B-354U-TRA1 RAM 1" TRACK BALL WITH T-BOLT ATTACHMENT

The RAM® Track Ball™ consists of a B size 1" rubber ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the RAM® Track Ball™ into your track and twist the ball clockwise to tighten in place. Twist counterclockwise to loosen or adjust the...

23,90 €
In Stock
R.A.M
RAP-B-400-201-AU UNPKD RAM TOUGH-CLAW W SHORT ARM

The RAM® Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The small version of the RAM® Tough-Claw™ can quickly be clamped on rails ranging from .625" to 1.14" in outer diameter and is ideal for mounting phones, tablets, action cameras, rod holders, and much more in a wide...

69,90 €
In Stock
LOWRANCE Lisavarustus
Sonar holder Runos, removable

Transducer holder. Allows you to adjust the sensor depth. Quick and easy to install. Made of vibration-proof aluminum. Length: 30-50 cm.

28,90 €
In Stock